Are you trying to log into your Netgear WiFi range extender but are unable to access the mywifiext administrative page? If the answer to the question is yes, then don’t sweat! We’ve got your tired back. Through this article, we’ll help you in troubleshooting the mywifiext.net not working issue in no time. All you have to do is, follow a few quick tips mentioned below are you are all ready to combat the issue. So, without any further ado, let’s get down to it, shall we?
Resolved: Mywifiext.net Not Working Issue
- WiFi Devices Should Be Well-Connected
First and foremost, make sure that your extender is well connected to the WiFi router. If there is no connection between both your WiFi devices, then it’s pretty obvious you won’t be able to access mywifiext.net.
Also, keep in mind that you’re using a cable to connect your extender and home router. The reason being, wireless connections aren’t that reliable when it comes to creating a connection between technical devices.
- Do Not Enter the Web Address in the Search Bar
One of the most common mistakes that users make while trying to log into their extender is that they enter the default web address in the search bar of the web browser. Are you making the same mistake?
Make sure that you enter the web address in the address bar of the web browser that you’re using to log into your WiFi device. Regardless of what internet browser you use, the address bar is located at the top of the browser.
- Power-Cycle the Netgear WiFi Extender
Sometimes, the reason why you aren’t able to access the mywifiext setup wizard might be because of a technical glitch. The best way to troubleshoot this issue is to restart your Netgear WiFi range extender.
Simply switch off your device, unplug it from the wall socket, wait for a couple of minutes, and plug it back into the socket. Oh! Don’t forget to press the Power button on your WiFi device. See? It was that easy.
- Update the Firmware of the WiFi Range Extender
On the off chance, if you still aren’t able to log into your Netgear WiFi range extender, then it is recommended that you update the firmware of your device. Here are the instructions that you need to consider in order to update the firmware of your WiFi extender:
- Open a web browser on your computer.
- Connect to Netgear_Ext SSID.
- Access the web user interface of your device.
- Go to Settings > Administration.
- Now, click on the Router Update option.
With that you are done updating the firmware of your Netgear WiFi range extender.
- Perform a Factory Default Reset
If you still aren’t able to open http://mywifiext.net, then it’s high time that you restore your Netgear extender to its factory default settings.
Resetting your WiFi device will surely help you get rid of the mywifiext.net not working issue.