If you are frustrated of the can’t access mywifiext.net issue, then congo, you’ve come to the right place looking for a solution. With the assistance of this article, you’ll become aware of the various troubleshooting tips needed to get rid of this little troublemaker.
So, without any further delay, let’s get started.
Top 5 Tips to Resolve Can’t Access Mywifiext.net Issue
Change the Location of Your Extender
If your Netgear WiFi range extender is surrounded by electronic devices, then you need to change the location of your device immediately. Our experts say that you should place your extender in the central location of your house.
Also, make sure that your WiFi device is at a safe distance from appliances like cordless phones, washing machines, microwaves, baby monitors, television, and much more. This action is quite important for you to take if you want to avoid interference in the WiFi signals of your device.
Place Your Extender Next to the Router
Are you sure that your Netgear extender and WiFi router are placed next to each other? If the answer is no, then don’t think twice before placing them in close proximity. The reason being, the distance between both your WiFi devices decides whether you can access mywifiext.net or not.
Moreover, try not to place your extender at a location that has no or very little network signal. Dead zones are always ready to stop the users from logging into their WiFi devices. Beware!
Use 192.168.1.250 to Log Into Your Device
Another reason that might be leading you to can’t access mywifiext.net not working issue is an incorrect web address. Thus, ensure that you type the right web address while trying to log into your Netgear WiFi extender.
If entering the correct web address doesn’t work, then you are free to use 192.168.1.250 the default IP address of the extender. Simply replace the web address with the IP address, click on the Enter key, and you are good to go.
Access Mywifiext.local On Apple Devices
Have you tried accessing the mywifiext setup wizard through your Apple device? Oops! Looks like you’ve made a blunder.
This is because mywifiext.net does not operate on your Apple or iOS devices. So, the next time that you try to log into your extender using an Apple device, make sure that you make use of mywifiext.local.
Reset Your Netgear WiFi Extender
After all the efforts that you’ve made, if you still aren’t able to get rid of the can’t access mywifiext.net issue, then it’s high time that you give the ultimate fix a try. By that, we mean that you need to perform Netgear extender factory reset.
In order words, resetting your device means restoring it to its factory default mode. In order to reset your Netgear extender, here the instructions that you need to follow:
Before you reset your device, ensure that it’s receiving enough power supply.
Then, locate the Reset button on the bottom of your WiFi device.
Once located, press the Reset button carefully using an oil pin.
You can also make use of a paper clip to reset your extender.
Once you’re done restoring your device to its factory default settings, you’ll surely be able to get rid of the can’t access mywifiext .net issue.